The Designer Range

Type Split System
Available In Reverse Cycle – 2.5kW, 3.5kW, 5.0kW


Key Features

10°C Heat Operation

The room temperature can be set to go no lower than 10°C, thus ensuring that the room does not get too cold when not occupied.

All DC

With All DC, electricity loss is decreased and power consumption reduced.

Apple-Catechin Filter

Fine dust, invisible mould spores and harmful microorganisms are absorbed onto the filter by static electricity and further growth is inhibited and deactivated by the polyphenol ingredient extracted from apples.

Auto Restart

Should there be a temporary loss of power, the unit will automatically restart itself in the same operating mode, once the power is restored.

Auto Shut Louvre

The auto shut louvres close or open automatically when the unit stops or starts.

Auto Changeover

The unit automatically switches between operating modes based on the temperature setting and room temperature.

Automatic Air Flow Adjustment

The micro-processor automatically adjusts the air flow to follow changes in room temperature.

Automatic Louvre

The position of the louvres is set automatically to match the operating mode. It is also possible to adjust the louvres using the remote control.

Blue Fin Heat Exchanger

Corrosion-resistance of the heat exchanger in coastal areas has been improved by blue fin treatment of the outdoor unit heat exchanger.

Economy Mode

Limits the maximum operation current, and performs operation with the power consumption suppressed.

Filter Sign

Select appropriate intervals for displaying the filter sign on the indoor unit according to the estimated amount of dust in the air of the room.

Human Sensor

Human sensor detects movement of people within the conditioned room.


i-PAM inverter technology enables high output and high efficiency performance.

Long-Life Ion Deodorisation Filter

The filter deodorises by powerfully decomposing absorbed odours using the oxidising and reducing effects of ion generated by the ultra-fine particle ceramic.

Low Noise Mode

The compressor speed and the outdoor unit fan speed are limited to reduce the operational noise.

On-Off Timer

ON-OFF timer can be set to operate once every 24 hours.

Powerful Mode

Powerful mode will operate the indoor unit fan and outdoor unit compressor at maximum operation to quickly make the room conditioned and comfortable.

Program Timer

This timer allows selection of one of four options. ON, OFF, ON ––> OFF, or OFF ––> ON.

Sleep Timer

The micro-processor gradually changes the room temperature, allowing you to sleep comfortably at night.

Super Quiet Mode

The indoor units fan can operate at a low speed to produce quieter operation.

Up/Down Swing Louvre

The up/down louvre automatically swings up and down.


v-PAM inverter technology increases the maximum output of the compressor significantly and enables high power and high efficiency.

Washable Panel

Dust that accumulates on the air conditioner can be easily cleaned with a damp cloth.

Weekly + Setback Timer

Weekly + setback timer can set temperature for two time spans and for each day of the week.

Weekly Timer

Different ON-OFF times can be set for up to 7 days.

Take control. Controller options.

This range is compatible with the following controller options.


ON-OFF Timer

ON-OFF timer can be set to operate once every 24 hours.

Weekly + Setback Timer

Weekly + Setback timer can set temperature for two time periods and for each day of the week.

Economy Mode

The economy operation will save energy in heating, cooling and dry mode and is set by pressing the button on the remote control.


Temperature Setback Timer

Use this timer function to change the set temperature in the operating times set for each day of the week.

Super Quiet Mode

The indoor unit’s fan can operate at a low speed to minimise noise.

Weekly Timer

Different ON-OFF times can be set for up to 7 days.


Backlit Display

An illuminated display for improved visibiltiy and clairty. Brightness and light duration can be customised to suit your preferences.

Set Temperature Auto Return

The set temperature automatically returns to the previous set temperature at the touch of a button.

Weekly Timer

Different ON-OFF times can be set for up to 7 days.


Wi-Fi Infrared Control

The Fujitsu General anywAiR technology Wi-Fi device offers users a Wi-Fi infrared solution to remotely control the indoor comfort of their home or office.

Backwards Compatible

 Available for a select range of Fujitsu General air conditioning units up to 10 years old, via the free easy-to-use myanywAiR app.

Easy to Use

View or change the temperature set point, fan speed and louver position; check the operating mode; view individual room temperatures; set timers and scenes and turn individual units on or off, anytime, anywhere.