Fujitsu – E3 Classic
The e3 Classic series uses the new super-efficient thermodynamic system using R32 refrigerant to heat or cool your home. This system can deliver more heat for your dollar than previous systems. The brilliant e3 series brings new and intelligent features to add comfort, economy and health to your home lifestyle.
Brilliant Energy Efficiency
The e3 R32 Thermodynamic System can deliver higher energy efficiency. Even more energy savings can be achieved with Fujitsu’s twin rotary DC compressor, DC Inverter control and DC fan motor technologies.
The ASTG09KMCA has achieved a “STAR RATING” of 5.0 for both heating and cooling.
Other higher capacity models in this range have also achieved superior high energy efficiency.
Human sensor control
When movement is not detected the energy save mode activates, and the capacity is reduced until the sensor detects human movement again. Human presence is detected in the room accurately by pyroelectric infrared sensor, which has a range 6 metres, between 90 degrees vertically and 100 degrees horizontally.
The diffuser operated automatically to match the heating or cooling mode. The result is faster, more efficient comfort.
Healthy air filters
Fujitsu’s advanced filter systems contribute to a fresher, cleaner and healthier living environment.
This smart, very thin and easy-to-use remote has a large LCD display and a one-touch button.
There are many new, unique features:
The e3 Series gives you 7-day ‘set-andforget’ control, if you wish.
ON/OFF timer can be set four times per day, so you can set any program to suit your lifestyle.
20 minutes continuous ‘extra power’ boost, to give you rapid heating or cooling whenever you want it.
Low noise mode for outdoor unit
The low noise button on the remote controller makes it easy to switch the outside unit to low noise.
10°C HEAT operation
The room temperature can be set to go no lower than 10C, thus ensuring that the room never gets too cold when not occupied
This energy saving operation lowers power consumption by cutting the maximum current. It is selected with just one touch on your controller.
The set temperature is gradually stepped down to match your body’s requirements as you fall asleep, and then is automatically and gradually stepped back up before waking.
ALL Fujitsu Hi-Wall models are equipped with 4 fan speeds including quiet fan mode, allowing some of the indoor units to operate as low as 21 or 22 decibels (that’s quieter than a human whisper). In addition to this, Fujitsu’s fan technology means that our models are quieter even when working their hardest to quickly heat or cool a room. The e3Series also incorporates quiet mode on the outdoor unit.
3.2kW of Heating
3.7kW of Heating
6.0kW of Heating
7.2kW of Heating
8.0kW of Heating
VERY HIGH CAPACITY MODELS
9.0kW of Heating
10.3kW of Heating