Cassette 4-way Flow
Available In | Reverse Cycle – 8.5kW, 10.0kW, 12.5kW, 14.0kW |
Refrigerant |
R410A |
Key Features
With All DC, electricity loss is decreased and power consumption reduced.
Should there be a temporary loss of power, the unit will automatically restart itself in the same operating mode, once the power is restored.
The unit automatically switches between operating modes based on the temperature setting and room temperature.
The micro-processor automatically adjusts the air flow to follow changes in room temperature.
The position of the louvres is set automatically to match the operating mode. It is also possible to adjust the louvres using the remote control.
Corrosion-resistance of the heat exchanger in coastal areas has been improved by blue fin treatment of the outdoor unit heat exchanger.
Limits the maximum operation current, and performs operation with the power consumption suppressed.
This timer allows selection of one of four options. ON, OFF, ON ––> OFF, or OFF ––> ON
The compressor speed and the outdoor unit fan speed are limited to reduce the operational noise.
i-PAM inverter technology enables high output and high efficiency performance.
ON-OFF timer can be set to operate once every 24 hours.
The indoor unit’s intake grille can be removed for easy cleaning and maintenance.
The micro-processor gradually changes the room temperature, allowing you to sleep comfortably at night.
The indoor units fan can operate at a low speed to produce quieter operation.
v-PAM inverter technology increases the maximum output of the compressor significantly and enables high power and high efficiency.
Dust that accumulates on the air conditioner can be easily cleaned with a damp cloth.
Weekly + setback timer can set temperature for two time spans and for each day of the week.
Different ON-OFF times can be set for up to 7 days.
Take control. Controller options.
This range is compatible with the following controller options.
AR-SY1
The compressor speed and the outdoor unit fan speed are limited to reduce the operational noise.
The economy operation will save energy in heating, cooling and dry mode and is set by pressing the button on the remote control.
The micro processor gradually changes the room temperature allowing you to sleep comfortably at night.
UTY-LNHY
4 timer programs: On / Off / Program / Sleep Program timer: Operates ON/OFF timer once within 24 hours Sleep timer: Corrects the set temperature automatically during sleep time.
Code selector switch prevents indoor unit mix-up (up to 4 codes). Wide and precise transmitting range.
UTY-RNNYN
ON-OFF Timer
ON-OFF timer can be set to operate once every 24 hours.
This timer allows selection of one of four options; ON, OFF, ON to OFF, or OFF to ON.
The compressor speed and the outdoor unit fan speed are limited to reduce the operational noise.